DEVICE_QUEUE_NOT_BUSY
   INVALID_AFFINITY_SET
      INVALID_DATA_ACCESS_TRAP
  (   INVALID_PROCESS_ATTACH_ATTEMPT
    (   INVALID_PROCESS_DETACH_ATTEMPT
    $   INVALID_SOFTWARE_INTERRUPT
        IRQL_NOT_DISPATCH_LEVEL
       IRQL_NOT_GREATER_OR_EQUAL
     IRQL_NOT_LESS_OR_EQUAL
    $   NO_EXCEPTION_HANDLING_SUPPORT
$   MAXIMUM_WAIT_OBJECTS_EXCEEDED
$   MUTEX_LEVEL_NUMBER_VIOLATION
     NO_USER_MODE_CONTEXT
      SPIN_LOCK_ALREADY_OWNED
      SPIN_LOCK_NOT_OWNED
       THREAD_NOT_MUTEX_OWNER
       TRAP_CAUSE_UNKNOWN
        EMPTY_THREAD_REAPER_LIST
  $   CREATE_DELETE_LOCK_NOT_LOCKED
$   LAST_CHANCE_CALLED_FROM_KMODE
   CID_HANDLE_CREATION
      CID_HANDLE_DELETION
      REFERENCE_BY_POINTER
     BAD_POOL_HEADER
      MEMORY_MANAGEMENT
   PFN_SHARE_COUNT
      PFN_REFERENCE_COUNT
       NO_SPIN_LOCK_AVAILABLE
    ?  Check to be sure you have adequate disk space. If a driver is
identified in the Stop message, disable the driver or check
with the manufacturer for driver updates. Try changing video
adapters.

Check with your hardware vendor for any BIOS updates. Disable
BIOS memory options such as caching or shadowing. If you need
to use Safe Mode to remove or disable components, restart your
computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
   $   SHARED_RESOURCE_CONV_ERROR
    (   KERNEL_APC_PENDING_DURING_EXIT
       QUOTA_UNDERFLOW
      FILE_SYSTEM
      Disable or uninstall any anti-virus, disk defragmentation
or backup utilities. Check your hard drive configuration,
and check for any updated drivers. Run CHKDSK /F to check
for hard drive corruption, and then restart your computer.
      NTFS_FILE_SYSTEM
     NPFS_FILE_SYSTEM
     CDFS_FILE_SYSTEM
     RDR_FILE_SYSTEM
      CORRUPT_ACCESS_TOKEN
     SECURITY_SYSTEM
      INCONSISTENT_IRP
     PANIC_STACK_SWITCH
       PORT_DRIVER_INTERNAL
      SCSI_DISK_DRIVER_INTERNAL
?  Run system diagnostics supplied by your hardware manufacturer.
In particular, run a memory check, and check for faulty or
mismatched memory. Try changing video adapters.

Check with your hardware vendor for any BIOS updates. Disable
BIOS memory options such as caching or shadowing. If you need
to use Safe Mode to remove or disable components, restart your
computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
      INSTRUCTION_BUS_ERROR
     SET_OF_INVALID_CONTEXT
    $   PHASE0_INITIALIZATION_FAILED
  $   PHASE1_INITIALIZATION_FAILED
  (   UNEXPECTED_INITIALIZATION_CALL
       CACHE_MANAGER
$   NO_MORE_IRP_STACK_LOCATIONS
   (   DEVICE_REFERENCE_COUNT_NOT_ZERO
      FLOPPY_INTERNAL_ERROR
     SERIAL_DRIVER_INTERNAL
        SYSTEM_EXIT_OWNED_MUTEX
   $   SYSTEM_UNWIND_PREVIOUS_USER
       SYSTEM_SERVICE_EXCEPTION
  $   INTERRUPT_UNWIND_ATTEMPTED
    (   INTERRUPT_EXCEPTION_NOT_HANDLED
   4   MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
    
  Remove any recently installed software including backup
utilities or disk-intensive applications.

If you need to use Safe Mode to remove or disable components,
restart your computer, press F8 to select Advanced Startup
Options, and then select Safe Mode.
     TARGET_MDL_TOO_SMALL
      MUST_SUCCEED_POOL_EMPTY
       ATDISK_DRIVER_INTERNAL
       NO_SUCH_PARTITION
(   MULTIPLE_IRP_COMPLETE_REQUESTS
    $   INSUFFICIENT_SYSTEM_MAP_REGS
  $   DEREF_UNKNOWN_LOGON_SESSION
       REF_UNKNOWN_LOGON_SESSION
$   CANCEL_STATE_IN_COMPLETED_IRP
(   PAGE_FAULT_WITH_INTERRUPTS_OFF
    (   IRQL_GT_ZERO_AT_SYSTEM_SERVICE
        STREAMS_INTERNAL_ERROR
    $   FATAL_UNHANDLED_HARD_ERROR
       NO_PAGES_AVAILABLE
       PFN_LIST_CORRUPT
     NDIS_INTERNAL_ERROR
   $   PAGE_FAULT_IN_NONPAGED_AREA
      REGISTRY_ERROR
       MAILSLOT_FILE_SYSTEM
     NO_BOOT_DEVICE
        LM_SERVER_INTERNAL_ERROR
      DATA_COHERENCY_EXCEPTION
  (   INSTRUCTION_COHERENCY_EXCEPTION
      XNS_INTERNAL_ERROR
       FTDISK_INTERNAL_ERROR
   PINBALL_FILE_SYSTEM
       CRITICAL_SERVICE_FAILED
      SET_ENV_VAR_FAILED
        HAL_INITIALIZATION_FAILED
   UNSUPPORTED_PROCESSOR
$   OBJECT_INITIALIZATION_FAILED
  (   SECURITY_INITIALIZATION_FAILED
    $   PROCESS_INITIALIZATION_FAILED
$   HAL1_INITIALIZATION_FAILED
    $   OBJECT1_INITIALIZATION_FAILED
(   SECURITY1_INITIALIZATION_FAILED
   (   SYMBOLIC_INITIALIZATION_FAILED
    $   MEMORY1_INITIALIZATION_FAILED
$   CACHE_INITIALIZATION_FAILED
   $   CONFIG_INITIALIZATION_FAILED
  $   FILE_INITIALIZATION_FAILED
        IO1_INITIALIZATION_FAILED
     LPC_INITIALIZATION_FAILED
(   PROCESS1_INITIALIZATION_FAILED
    $   REFMON_INITIALIZATION_FAILED
  (   SESSION1_INITIALIZATION_FAILED
    (   SESSION2_INITIALIZATION_FAILED
    (   SESSION3_INITIALIZATION_FAILED
    (   SESSION4_INITIALIZATION_FAILED
    (   SESSION5_INITIALIZATION_FAILED
    $   ASSIGN_DRIVE_LETTERS_FAILED
      CONFIG_LIST_FAILED
        BAD_SYSTEM_CONFIG_INFO
    $   CANNOT_WRITE_CONFIGURATION
        PROCESS_HAS_LOCKED_PAGES
      KERNEL_STACK_INPAGE_ERROR
   PHASE0_EXCEPTION
  (   Mismatched kernel and hal image.
      KERNEL_DATA_INPAGE_ERROR
  
  Check for viruses on your computer. Remove any newly installed
hard drives or hard drive controllers. Check your hard drive
to make sure it is properly configured and terminated.
Run CHKDSK /F to check for hard drive corruption, and then
restart your computer.
     INSTALL_MORE_MEMORY
   ,   SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
   ?  Run a system diagnostic utility supplied by your hardware manufacturer.
In particular, run a memory check, and check for faulty or mismatched
memory. Try changing video adapters.

Disable or remove any newly installed hardware and drivers. Disable or
remove any newly installed software. If you need to use Safe Mode to
remove or disable components, restart your computer, press F8 to select
Advanced Startup Options, and then select Safe Mode.
      Hardware malfunction.
     SPIN_LOCK_INIT_FAILURE
       DFS_FILE_SYSTEM
      OFS_FILE_SYSTEM
      RECOM_DRIVER
     SETUP_FAILURE
     Audit attempt has failed.
0   This system may be infected with a virus.
(   KERNEL_MODE_EXCEPTION_NOT_HANDLED
     PP0_INITIALIZATION_FAILED
     PP1_INITIALIZATION_FAILED
$   WIN32K_INIT_OR_RIT_FAILURE
        UP_DRIVER_ON_MP_SYSTEM
       INVALID_KERNEL_HANDLE
$   KERNEL_STACK_LOCKED_AT_EXIT
      PNP_INTERNAL_ERROR
        INVALID_WORK_QUEUE_ITEM
       BOUND_IMAGE_UNSUPPORTED
   $   END_OF_NT_EVALUATION_PERIOD
       INVALID_REGION_OR_SEGMENT
     SYSTEM_LICENSE_VIOLATION
     UDFS_FILE_SYSTEM
      MACHINE_CHECK_EXCEPTION
   $   DRIVER_POWER_STATE_FAILURE
       INTERNAL_POWER_ERROR
  L   Inconsistency detected in the PCI Bus driver's internal structures.
   4   A CRC check on the memory range has failed
       ACPI_DRIVER_INTERNAL
  X   Internal inconsistency while representing
Ntfs Structured Storage as a DOCFILE.
  $  The BIOS in this system is not fully ACPI compliant.  Please contact your
system vendor or visit a9cK9s2c8@1M7q4)9K6b7g2)9J5c8W2)9J5c8Y4N6%4N6#2)9J5k6h3S2S2M7X3c8%4j5i4u0W2i4K6u0V1N6i4m8V1j5i4c8W2i4K6u0W2j5$3!0E0 for an updated BIOS.
If you are unable to obtain an updated BIOS or the latest BIOS supplied by
your vendor is not ACPI compliant, you can turn off ACPI mode during text
mode setup.  To do this, simply press the F7 key when you are prompted to
install storage drivers.  The system will not notify you that the F7 key
was pressed - it will silently disable ACPI and allow you to continue
your installation.
     FP_EMULATION_ERROR
       BAD_EXHANDLE
  <   The system is booting in safemode - Minimal Services
  H   The system is booting in safemode - Minimal Services with Network
D   The system is booting in safemode - Directory Services Repair
(   SESSION_HAS_VALID_POOL_ON_EXIT
    H   Allocate from NonPaged Pool failed for a HAL critical allocation.
,   The video driver failed to initialize
   Loaded driver
   Did not load driver
      Boot Logging Enabled
  T   A wait operation, attach process, or yield was attempted from a DPC routine.
  H   A parity error in the system memory or I/O system was detected.
   (   SESSION_HAS_VALID_VIEWS_ON_EXIT
   T   An initialization failure occurred while attempting to boot from the network.
h   A duplicate IP address was assigned to this machine while attempting to
boot from the network.
   X   The hibernated memory image does not match the current hardware configuration.
    8   An attempt was made to write to read-only memory.
   MUTEX_ALREADY_OWNED
   <   An attempt to access PCI configuration space failed.
  0   SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
      BAD_POOL_CALLER
   t
  
A system file that is owned by Windows was replaced by an application
running on your system.  The operating system detected this and tried to
verify the validity of the file's signature.  The operating system found that
the file signature is not valid and put the original, correct file back
so that your operating system will continue to function properly.
     
A device driver attempting to corrupt the system has been caught.
The faulty driver currently on the kernel stack must be replaced
with a working version.
    ?  A device driver has pool.

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

Run the driver verifier against any new (or suspect) drivers.
If that doesn't reveal the corrupting driver, try enabling special pool.
Both of these features are intended to catch the corruption at an earlier
point where the offending driver can be identified.

If you need to use Safe Mode to remove or disable components,
restart your computer, press F8 to select Advanced Startup Options,
and then select Safe Mode.
     
A device driver attempting to corrupt the system has been caught.
The faulty driver currently on the kernel stack must be replaced
with a working version.
      
A kernel timer or DPC was found in memory which must not contain such
items.  Usually this is memory being freed.  This is usually caused by
a device driver that has not cleaned up properly before freeing memory.
     
The processor's IRQL is not valid for the currently executing context.
This is a software error condition and is usually caused by a device
driver changing IRQL and not restoring it to its previous value when
it has finished its task.
      
The IO manager has detected a violation by a driver that is being verified.
The faulty driver that is being verified must be debugged and
replaced with a working version.
    P   
Plug and Play detected an error most likely caused by a faulty driver.
  ,   DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
      
The system is attempting to access memory after it has been freed.
This usually indicates a system-driver synchronization issue.
      
The system is attempting to access memory beyond the end of the allocation.
This usually indicates a system-driver synchronization issue.
  <   DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
@   TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE
        DRIVER_CORRUPTED_MMPOOL
   $   DRIVER_IRQL_NOT_LESS_OR_EQUAL
X   The driver mistakenly marked a part of it's image pagable instead of nonpagable.
  D   The driver unloaded without cancelling pending operations.
    L   
The driver is attempting to access memory after it has been freed.
  T   
The driver is attempting to access memory beyond the end of the allocation.
H   
The driver is attempting to unmap an invalid memory address.
    @   
The driver has used an excessive number of system PTEs.
H   
The driver is corrupting the locked pages tracking structures.
  0   
The driver is mismanaging system PTEs.
  D   
A driver has corrupted the memory management system PTEs.
   l   
A driver accessed a stack address that lies below the current stack pointer
of the stack's thread.
T   
A driver corrupted pool memory used for holding pages destined for disk.
    €   
A worker thread is impersonating another process. The work item forgot to
disable impersonation before it returned.
    ?  
Your computer (BIOS) has reported that a component in your system is faulty and
has prevented Windows from operating.  You can determine which component is
faulty by running the diagnostic disk or tool that came with your computer.

If you do not have this tool, you must contact your system vendor and report
this error message to them.  They will be able to assist you in correcting this
hardware problem thereby allowing Windows to operate.
   ,   WORKER_THREAD_RETURNED_AT_BAD_IRQL
    8   
The end-user manually generated the crashdump.
  @   
A thread tried to release a resource it did not own.
      
A executive worker item was found in memory which must not contain such
items.  Usually this is memory being freed.  This is usually caused by
a device driver that has not cleaned up properly before freeing memory.
        POWER_FAILURE_SIMULATE
      
The DMA Subsystem has detected an illegal DMA operation initiated by
a driver being verified. The faulty driver must be replaced with a
working version.
  t   
While restoring the previously saved floating point state for a thread,
the state was found to be invalid.
   
The fileobject passed to IoCancelFileOpen is invalid. It should have reference of 1. The driver
that called IoCancelFileOpen is at fault.
     
An executive worker thread is being terminated without having gone through the worker thread rundown code.
Work items queued to the Ex worker queue must not terminate their threads.
A stack trace should indicate the culprit.
     
The device driver got stuck in an infinite loop. This usually indicates
problem with the device itself or with the device driver programming the
hardware incorrectly.

Please check with your hardware device vendor for any driver updates.
   4
  
The filesystem driver stack has deadlocked and all the modified pages are
destined for the filesystem.  Since the filesystem is nonoperational, the
system has crashed because none of the modified pages can be reused with
losing data.  Any filesystem or filter driver in the stack may be at fault.
0   SESSION_HAS_VALID_SPECIAL_POOL_ON_EXIT
        UNMOUNTABLE_BOOT_VOLUME
   d   
The kernel attempted to ready a thread that was in an incorrect state such as terminated.
   \   
The SCSI verifier has detected an error in a SCSI miniport driver being verified.
   <   
An interrupt storm has caused the system to hang.
   X   
The system does not shutdown in a deterministic manner so bugchecks can occur.
  d   
A process or thread crucial to system operation has unexpectedly exited or been terminated.
   FLTMGR_FILE_SYSTEM
    X   
The PCI driver has detected an error in a PCI device or BIOS being verified.
       A driver has overrun a stack-based buffer.  This overrun could potentially allow a malicious
user to gain control of this machine.
   <   An attempt was made to execute non-executable memory.
   BUGCODE_USB_DRIVER
    4   An invalid AGP memory access was detected.
    D   The Graphics Aperture Redirection Table (Gart) is corrupt.
    D   The AGP HW has been reprogrammed by an unauthorized agent.
    X   A 3rd Party file system or file system filter has failed in an unrecoverable way.
<   Microsoft (R) Windows (R) Version %hs (Build %u%hs)
   h   A problem has been detected and Windows has been shut down to prevent damage
to your computer.
   @   The problem seems to be caused by the following file:

      If this is the first time you've seen this Stop error screen,
restart your computer. If this screen appears again, follow
these steps:

    ?  Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
        Technical information:
       Service Pack
  ,   %u System Processor [%u MB Memory] %Z
   MultiProcessor Kernel
8   A kernel thread terminated while holding a mutex
  (   Beginning dump of physical memory
(   Dumping physical memory to disk
   |   Physical memory dump complete.
Contact your system administrator or technical support group for further
assistance.
0   %u System Processors [%u MB Memory] %Z
       RC
       Undocked Profile
     Docked Profile
       Profile

[培训]内核驱动高级班，冲击BAT一流互联网大厂工作，每周日13:00-18:00直播授课